Passer aux informations produits
1 de 7


PEI Spring Steel Sheet Hotbed Sticker Easy Removal Flexible Magnetic 310mmx310mm

PEI Spring Steel Sheet Hotbed Sticker Easy Removal Flexible Magnetic 310mmx310mm

Prix habituel $24.90 USD
Prix habituel $39.00 USD Prix promotionnel $24.90 USD
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.

ZONESTAR 3D Printer Heatbed PEI Sticker Removal Spring Steel Sheet Pre-applied PEI Flexible Magnetic Base


  • Never warp & Never rust.
  • Easy to get the first layer even for a new user
  • Flexible, Removable, stick to magnets very well
  • Suits variety of filaments, especially for PLA 
  • Free clean- just flex the plate a little then take the prints off after cooled
  • Fast heater performance, less waiting time after printing.
  • A lifetime 3D printer bed


  • Piece A: The spring steel plate with coating (PEI surface).
  • Piece B: The magnetic base piece.
  • Single side coating: One side of the spring steel plate has coating.
  • Double sides coating: Both side of the spring steel plate has coating.

How to choose:

After prolonged use, the coating will peel off, resulting in a longer service life for double-sided coatings. But if you want the printed piece to have a very smooth bottom, you can choose the option of single-sided coating and use it with the smooth side facing up.
Tips: If you are using a single sided coating with the smooth side facing upwards, please note:
1. When printing, it is necessary to adjust the distance between the nozzle and the platform in the first layer appropriately,
2. You can consider reducing the printing speed of the first layer during slicing, increasing the temperature of the hot bed, increasing brim, enabling "elephant feet", and other methods to prevent the printer from falling off the hot bed.


100% real Ultem1000( PEI)amber color, matte surface.-0.125mm thickness.
This spring steel sheet is flat, flexible, stainless stick to magnets very well.

How to use?

After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.
Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.


Afficher tous les détails